集装箱制作完成后的检验是为了确保集装箱质量，并保证集装箱在使用过程中的性。通常，济南集装箱厂家制作完成后的检验应包括以下几个方面：

The inspection after the completion of container production is to ensure the quality of the container and ensure the safety of the container during use. Usually, the inspection conducted by Jinan container manufacturers after production should include the following aspects:

1.外观检验：检查集装箱的外观是否整洁、无明显破损、划痕、凹陷等现象，并检查各个焊接点是否牢固、无焊渣等缺陷。

1. Appearance inspection: Check the appearance of the container for cleanliness, no obvious damage, scratches, dents, etc., and check whether each welding point is firm and free of defects such as welding slag.

2.尺寸检验：检查集装箱的长、宽、高、厚度等尺寸是否符合设计要求和标准。

2. Dimensional inspection: Check whether the length, width, height, thickness and other dimensions of the container meet the design requirements and national standards.

3.闭门检验：检查集装箱的门是否完全闭合，密封性是否正常。

3. Closed door inspection: Check whether the door of the container is fully closed and whether the sealing is normal.

4.地板检验：检查集装箱的地板是否平整、无凹凸不平、没有松动或者出现破损等现象。

4. Floor inspection: Check whether the floor of the container is flat, free from unevenness, looseness, or damage.

5.内部检验：检查集装箱内部的角钢、支撑件是否完好，以及门锁、焊接是否牢固等。

5. Internal inspection: Check whether the angle steel and support components inside the container are intact, as well as whether the door lock and welding are firm.

6.涂层检验：检查集装箱的涂层质量是否符合要求，是否存在麻点、气泡等不良现象。

6. Coating inspection: Check whether the coating quality of the container meets the requirements and whether there are any defects such as pits and bubbles.

7.负载性能检验：检查集装箱的承载能力，使用负载装置进行负载测试，检查集装箱是否能够承受设计载荷。

7. Load performance inspection: check the carrying capacity of the container, use the load device to carry out load testing, and check whether the container can bear the design load.

8.防锈防腐检验：检查集装箱的表面防锈涂层以及内部防腐涂层是否符合要求，并无麻点、气泡、掉漆等现象。

8. Rust and corrosion prevention inspection: Check whether the surface rust prevention coating and internal corrosion prevention coating of the container meet the requirements, and there are no signs of pitting, bubbles, paint peeling, etc.

以上检测项目基本涵盖了集装箱制作后的检验，确保集装箱制作完成后符合设计标准和标准，使用过程中更加可靠。更多相关疑惑或者需求，就来我们网站http://www.jnpkjzx.com咨询吧！

The above inspection items basically cover the comprehensive inspection after container production, ensuring that the container meets the design standards and national standards after production, and is safer and more reliable during use. For more related doubts or needs, come to our website http://www.jnpkjzx.com Consult!